Chapter 15. Dedicated Connections


SOME OF THE MAIN TOPICS IN THIS CHAPTER ARE

Leased Lines 240

Asynchronous Transfer Mode (ATM) 244

The Importance of Frame Relay and the X.25 Interface 251

The preceding chapter covered some of the dial-up solutions you can use to connect your LAN to a wide area network (WAN), or to connect branch offices to your LAN. In this chapter you will learn about the dedicated mediums that have typically been used to connect business locations so that large data transfers can take place. Some are traditional approaches that still have a place in today's network environment. T1 lines (digital leased lines), ATM, and even Frame Relay are still widely implemented. Indeed, ATM and Frame Relay have continued to adapt to today's networking environment by providing a fast transport for other better known protocols, such as IP. That said, multi-protocol label switching (MPLS) and Layer 3 IP technology are starting to replace ATM and Frame Relay on a global scale. These types of connections are normally used in situations in which a large bandwidth and reliability of the connection are the most important considering factors.

Note

One technology that has been considered for the past decade as a major contender for access to the corporate networks and backup lines is ISDN (Integrated Services Digital Network). This technology was developed to offer up to 128Kbps which equates to two channels of 56 kbps or 64 kbps B (Bearer) and one D (Data) channel. This describes the Basic Rate Interface (BRI) ISDN service which is the most popular version. A higher-rate version called the Primary Rate Interface (PRI) offers 23 channels of 56 kbps or 64 kbps B (Bearer) and one D (Data) channel to carry data and signaling. However, ISDN comes at a higher price than many of today's available options, and the conditioning, testing, and configuration for an ISDN line can be quite time-consuming. ISDN was developed a decade ago when the concept of high-rate transmissions across an analog telephone line was considered to be the best solution at that time. ISDN still has a place in today's networks, particularly with regards to networked audio/visual (A/V) systems. It's just not used in the same ways that it had been in the past.


In the next two chapters you will learn about other technologies, such as digital subscriber lines (xDSL) and cable modems, that can be used to connect remote users to your network with more bandwidth than can be accomplished by using a dial-up modem with an ordinary analog telephone line. Although many network administrators consider these technologies to be targeted toward a home user, they can be employed inexpensively to allow you to connect low-volume traffic from home workers as well as branch offices.

Note

While ISDN seems to be falling by the wayside, DSL and cable modem access actually offer superior service in bandwidth compared to ISDN, in most instances. DSL service, if it is within the allowable distance from your phone company's office, provides a reliable service that can serve many branch office needs, at a fraction of the cost of a private dedicated line. For users who work at home or are operating in a small or home office, it is also much less expensive than ISDN. One important factor to remember is that most xDSL and cable modem connections offer a larger bandwidth for downloading than uploading. For xDSL customers, you will find that most telcos can offer a wide variety of services that are not geared toward home users, and can give you the same bandwidth for both uploads and downloads. That is, if you live in a DSL-accessible service area.





Upgrading and Repairing Networks
Upgrading and Repairing Networks (5th Edition)
ISBN: 078973530X
EAN: 2147483647
Year: 2006
Pages: 411

flylib.com © 2008-2017.
If you may any questions please contact us: flylib@qtcs.net